Chainsaw Teeth Sharpener with Guided Stone and Adjustable Pin Mount for 14-20in Bars

Sharpen Dull Chains Right On The Job Site

Your chain starts dragging mid cut and you're losing time on every pass. You can't haul the saw back to the shop, and you're stuck pushing harder just to get through the wood. This sharpener lets you restore cutting edges in seconds during breaks, at the truck, or right where you're working.

You slide the bar tip into the guide, lock the cover, and press the tool against a stable piece of wood. Running the chain brings each tooth into contact with the sharpening stone. The internal guide keeps the stone aligned with the tooth edge for even contact across the cutting surface.

It fits two hole guide bars in 14, 16, 18, and 20 inch lengths. The dual locating pins hold the bar steady while one pin adjusts to match hole spacing from 0.7 to 1.3 inches. Each light touch up takes three to five seconds per tooth, and worn teeth get sharper with a few extra passes.

The compact build fits in a tool bag and stays ready when edges start to dull. You can keep it on the machine or toss it in the truck for job site repairs. The stone uses the chain's natural motion to engage each tooth without complex adjustments or lengthy setup.

• THREE TO FIVE SECOND TOUCH UPS: Light sharpening takes three to five seconds per tooth, restoring cutting performance during work breaks without lengthy downtime.
  
  
• FITS FOUR BAR LENGTHS: Works with 14, 16, 18, and 20 inch two hole guide bars, covering common sizes across multiple saws.
  
  
• ADJUSTABLE HOLE SPACING: One locating pin adjusts to match hole spacing from 0.7 to 1.3 inches, eliminating the need for separate adapters.
  
  
• GUIDED STONE ALIGNMENT: Internal guide keeps the sharpening stone aligned with each tooth edge, producing even contact and consistent cutting angles across the chain.
  
  
• PRESS AND SHARPEN METHOD: Lock the bar tip in the guide, press the tool against wood, and run the chain to engage the stone automatically.
  
  
• COMPACT JOB SITE BUILD: Small footprint and lightweight construction fit in tool bags, staying ready for unexpected dulling between cuts or at remote locations.
  
  
• NO CHAIN REMOVAL NEEDED: Sharpens teeth while the chain stays mounted on the bar, following standard safety practices for field maintenance and quick repairs.

CHAINSAW TEETH SHARPENER SPECS

• Product Type: Chainsaw Teeth Sharpener
  
  
• Bar Compatibility: 14, 16, 18, 20 Inch Two Hole Bars
  
  
• Mount Type: Dual Locating Pins
  
  
• Hole Spacing Range: 0.7 to 1.3 Inches
  
  
• Touch Up Time: 3 to 5 Seconds Per Tooth
  
  
• Operation Method: Press Against Wood While Cutting

PACKAGE INCLUDES:

• 1 x Chainsaw Teeth Sharpener
  
  
• 1 x Sharpening Stone