Heat Powered Stove Fan with Automatic Activation and Safety Lift Protection

Spread Warmth Across Your Whole Room with This Stove Fan

The fire's roaring but half your room stays freezing cold. You're warm by the stove while your family bundles up on the far couch. This fan moves heated air into every corner during cold mornings, movie nights, or when guests come over.

Place the fan on your stove's flat top and it starts spinning once the surface hits 140°F. The thermoelectric generator converts heat into rotational energy and spins four anodized aluminum blades without batteries or electrical cords. Blade speed adjusts automatically as your stove temperature rises and falls.

It pushes 180 to 210 cubic feet of air per minute at speeds reaching 1100 RPM. The blades operate under 25 decibels so you hear conversations and shows clearly. It stands 8.8 inches tall and spans 7.1 inches wide fitting most wood stove surfaces.

The anodized aluminum body withstands surface heat up to 662°F without warping through repeated heating cycles. A safety mechanism lifts the front edge when temperatures exceed 400°F and protects internal parts from overheating. The black finish blends with existing stove designs and resists discoloration from ash and soot.

• STARTS AT 140°F AUTOMATICALLY: Begins rotating when your stove reaches activation temperature removing the need for switches, buttons, or manual controls entirely.
  
  
• PUSHES 210 CFM AT PEAK: Circulates heated air at 1100 RPM reaching far walls, hallways, and cold zones across your entire living area.
  
  
• WHISPER QUIET UNDER 25 DB: Runs softer than a library whisper allowing uninterrupted reading, conversations, or television viewing without mechanical hum.
  
  
• LIFTS AT 400°F FOR SAFETY: Raises the front edge automatically when excessive heat builds preventing motor damage during intense burns or overnight fires.
  
  
• WITHSTANDS 662°F SURFACE TEMPS: Survives extreme direct heat without cracking or melting due to anodized aluminum construction designed for continuous stove contact.
  
  
• NO ELECTRICITY REQUIRED: Operates entirely on thermal energy from your wood stove eliminating battery replacements, outlet access, or tangled power cords.
  
  
• FITS 8.8 BY 7.1 INCHES: Sits securely on standard stove tops without blocking flue pipes, damper controls, or wood loading access during refueling.
  
  
• WORKS FROM 140°F TO 662°F: Functions across low smoldering fires and roaring blazes adapting blade speed to match your current heating needs.

HEAT POWERED STOVE FAN SPECS

• Airflow: 180 to 210 CFM
  
  
• Blade Speed: 1100 RPM
  
  
• Blade Count: 4
  
  
• Noise: Under 25 dB
  
  
• Activation Temperature: 140°F
  
  
• Operating Range: 140°F to 662°F
  
  
• Construction: Anodized Aluminum
  
  
• Height: 8.8 Inches
  
  
• Width: 7.1 Inches
  
  
• Finish: Black

PACKAGE INCLUDES:

• 1 x Heat Powered Stove Fan
  
  
• 1 x User Manual